There many steps to follow in making home made jewelry. There are however necklace and earring stands that will be easy to make. This article will show you the simple way to do that. If you would rather purchase a stand then you can just keep an eye open for any jewelry display update that could be printed in your favourite mag or online blog. It your financial position is low then the stand below will do fine if you take your time and make it properly.

The materials you will need are :

Different kinds of templates
Black/white foam core board
3mm box board sheet
Glue
Double-sided black tape ( 12mm wide )
Tube black acrylic paint
Paint brush
Thick card for your template
Stanley knife

The process :

1. Print out the templates; re size it if you need with the employment of a photocopier.

2. Paste your template on your thick card using glue and cut out the shape.

3. Employing a biro, trace the form of your template onto a foam core board. Use a Stanley knife to cut out the shapes ; if there is straight edges employ a ruler.

4. The stand at the back of the template is mostly a bit shorter, so the length from point to finish should be 22cms. Trace this shape onto the box board then cut it out. For the earring stand, you may use the same template, just center the ruler thru the point and ran a line on all sides of the ruler-3cms wide and nine cm. Long.

5. Score a line after you finished cutting out the stand, about a centimeter down to make the bend. You can refer the stand to a picture frame if you are not sure about it.

6. Attach a bit of double sided tape to the 1cm block on the side which has already got a scored line. This is going to be attached to the foam core.

7. Next you have to bring them both together. You will find it a bit of a juggle, but it is's ok. Then line up the two bottom edges. Don't worry if the stand will hang out a few millimeters, it really is not important because when it's standing upright, it won't be seen from the front. After that, you can now attach the stand to the foam core on the opposite side of the tape.

8. Lastly, as the box board comes in a natural cardboard color, you have to paint it to match the white or black, have it dry for 2 hours.

Now you have your display unit you can showcase your jewelry items. If you have just stumbled onto the current page and aren't certain how to make any jewellery then there are numerous sites that offer straightforward tutorials on, how do I am making a beaded snowflake, how do I make a toggle necklace etc? Just doing a fast search on jewelry making will gives you tons of new jewelry pieces that you can make.